[Pipeline Inspection] Middle East 168 & 325 Pipeline Inspection Project Successfully Completed

Categories:Construction case
Author:
Origin:
Time of issue:2025-04-29 09:27
Views:0

[Pipeline Inspection] Middle East 168 & 325 Pipeline Inspection Project Successfully Completed

service content: the diameter of the pipeline is 168mm and 325mm, and the total length of the pipeline is 62km. The service content includes pipeline pigging, geometric inspection, axial magnetic flux leakage inspection and circumferential magnetic flux leakage inspection. Before testing, the basic situation of the pipeline shall be understood through the pipeline questionnaire and site survey report provided. After the engineer to the site to do pre-construction preparation, assembly and commissioning of equipment, etc. Finally, pigging and testing are started according to the construction plan developed by the testing center.
Site construction:

the on-site personnel are opening the blind plate and preparing to install the tee
local agents and Ditek personnel jointly served and successfully completed diameter measurement, foam and steel brush pigging, as well as geometric deformation, axial magnetic flux leakage and circumferential magnetic flux leakage detection.
Excavation verification: 16 points have been excavated, and the excavation verification results are good.

The defect feature here is cluster, and the internal detection results are consistent with the excavation field verification results.

The defect here is characterized by a circumferential groove, and the internal detection results are consistent with the excavation field verification results.